NewAir AI-215R Manual de instrucciones descargar pdf (Pagina 8)

http://www.NewAir.com

OPERATING INSTRUCTIONS

MAKING ICE

1. Open the unit’s cover, remove the ice basket, and pour water into the

water reservoir. Keep the water level below the “MAX” line marked inside

the reservoir.

2. Plug in the unit to the grounded power supply outlet.

3. Press the “ON/OFF” button on the control panel to begin the ice making

cycle.

4. Select the size of the ice cube by pressing the “SELECT” button. If the room

temperature is lower than 60°F, it is recommended to select small or

medium ice in order to avoid the ice sticking together.

5. The ice making cycle lasts anywhere from 7 to 13 minutes, depending on

the size of the ice cubes you select and the ambient room temperature. Ice

making time may vary significantly in extremely high room temperatures.

6. Periodically verify the water level in the water reservoir when the ice

maker is on. If the water level is too low, the ice maker will automatically

stop and the “Add Water” indictor light will flash in the LCD display

window. Press the “POWER” button to stop the unit and unplug it. Fill the

reservoir with water up to the level mark. Plug it in and press the “POWER”

button again to restart the unit. Allow at least 3 minutes for the

refrigerant inside the compressor to settle before restarting.

7. The ice maker automatically stops working when the ice basket is full. The

“Ice Bucket Full” indicator will also turn on at this time.

8. Change the water in the reservoir every 24 hours to ensure hygienic ice. If

the ice maker will not be used for an extended period of time, drain the

water from the reservoir by unplugging the drain off cap located on the

side of the ice maker.

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

NewAir AI-215R Manual de instrucciones Pagina 8